REMFORM® II F™ Zinc plated screw, Pan head flange TORX PLUS® AUTOSERT®

For the assembly of very hard plastic thermoset materials, Magnesium and Aluminum light alloys.

REMFORM® II F™ Zinc plated screw, Pan head flange TORX PLUS® AUTOSERT®
REMFORM® II F™ Zinc plated screw, Pan head flange TORX PLUS® AUTOSERT®

Product overview

REMFORM® II F™ thread forming screws are specially designed for the assembly of very hard plastics, thermoset, Magnesium, Aluminum light alloy and other non-ferrous materials including copper, brass, etc.

The smaller pitch of REMFORM® II F™ screws provides larger shearing zone, increasing pull-out and vibrational loosening resistance.

Apart from the references available in stock, we produce customised screws to fit your exact requirements. Contact us 

Samples
E-shop
3D CAD Files
Quotation

List of references

Filters
Screw diameter (mm)
2.0
2.5
3.0
3.5
4.0
Close
Screw length L (mm)
6
8
10
12
14
Close
Head diameter D (mm)
4.30
5.30
6.30
7.30
8.30
Close
Recess
TORX PLUS® AUTOSERT® 6 IP
TORX PLUS® AUTOSERT® 8 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
Close
Reference
J
d
26F287PA
28F287PA
210F287PA
258F287PA
2510F287PA
36F287PA
38F287PA
310F287PA
312F287PA
314F287PA
3510F287PA
410F287PA
Screw diameter (mm)
J
d
2.0
2.0
2.0
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.5
4.0
Screw length L (mm)
J
d
6
8
10
8
10
6
8
10
12
14
10
10
Head diameter D (mm)
J
d
4.30
4.30
4.30
5.30
5.30
6.30
6.30
6.30
6.30
6.30
7.30
8.30
Recess
J
d
TORX PLUS® AUTOSERT® 6 IP
TORX PLUS® AUTOSERT® 6 IP
TORX PLUS® AUTOSERT® 6 IP
TORX PLUS® AUTOSERT® 8 IP
TORX PLUS® AUTOSERT® 8 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
12 / 12 references are shown

Hole parameters calculator

In order to ensure a safe installation and stable clamping force, it's relevant to pay attention to the pilot hole configuration. The recommended dimensions for core hole diameter and length of engagement are available at Design Guidelines. Go to Design Guidelines
https://www.celofasteners.com/img/cms/category-products/plastic/boss-design-plastic.jpg

Applications

REMFORM® II F™ screws are recommended for the assembly of: Highly reinforced plastics and thermoplastic parts in applications where the length of engagement is lower than optimal. Magnesium elements with drilled, injected or punched holes. Aluminum profiles with open holes.

Do you have any questions about this product?

Request more info