CELO, global industrial fasteners and screw manufacturer
-
Back
Menu
-
en
REMFORM® II HS™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®, INOX A2
The best in its class for highly demanding plastic assemblies.
Product overview
REMFORM® II HS™ (High Strength) screws have been developed for the direct assembly of thermoplastics in applications with high mechanical requirements.
The improved thread design results in a more resistant, safe and optimized assembly of fiber reinforced thermoplastics, offering high clamping force, pull-out and vibration loosening resistance.
Apart from the references available in stock, we produce customised screws to fit your exact requirements.
List of references
Filters
Screw diameter (mm)
Close
3.0
3.5
4.0
5.0
Screw length L (mm)
Close
8
12
10
16
20
Head diameter D (mm)
Close
5.30
6.20
7.00
8.20
Recess
Close
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
Reference
J
d
X38HSX81PA
X312HSX81PA
X358HSX81PA
X410HSX81PA
X416HSX81PA
X520HSX81PA
Screw diameter (mm)
J
d
3.0
3.0
3.5
4.0
4.0
5.0
Screw length L (mm)
J
d
8
12
8
10
16
20
Head diameter D (mm)
J
d
5.30
5.30
6.20
7.00
7.00
8.20
Recess
J
d
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
6 / 6 references are shown
Hole parameters calculator
In order to ensure a safe installation and stable clamping force, it's relevant to pay attention to the boss design. The recommended dimensions for core hole diameter and length of engagement are available at Design Guidelines.
Go to Design Guidelines
Applications
REMFORM® II HS™ screws are recommended for assemblies on high strength or fiber-reinforced materials that require: High assembly torque, either with hard plastics or very deep assemblies. High clamping force. High pull-out resistance. High resistance to vibration loosening.
Do you have any questions about this product?
Request more info